Pumping

Pumping is the ejection of material by water through joints or cracks, caused by deflection of the slab under passing loads. As water is ejected, it carries particles of gravel, sand, clay, or silt, resulting in a progressive loss of pavement support. Surface staining, and base or subgrade material on the pavement close to joints or cracks, are evidence of pumping. Pumping near joints indicates poor joint sealer and loss of support, that will lead to cracking under repeated loads. The joint seal must be identified as defective before pumping can be said to exist. Pumping can occur at cracks as well as joints.

Distress Example Description
Overview photo of a slab corner where the pavement surface at the corner is discolored.  The discoloring (or staining)           of the surface is actually subgrade material that has been ejected from the subgrade due to pumping. No degrees of severity are defined. It is sufficient to indicate that pumping exists.